36 Chapter 6 Reference
● To set input signal selection [Inp ut Selection]
The monitor recognizes the con nector through which PC signals are input.
Priority setting Function
Auto Whe n a PC is turned off or enters the powersaving mode, the mon itor
automatically displays another signal.
Manual The monitor detects only the PC’s signals cur rently displaying automatically.
Select an active input signal with .
Procedure
1. Choose < Tools> from the Adjustment menu, and press .
2. Choose <In put Selection> from the <Tools> menu, and press .
The <Input Selection> menu appears.
3. Select “Auto” or “Manual” with or .
4. Pre ss to exit the adjustment.
Attention
• W hen “Auto” is selected for <Input Selection>, the monitor’s power-saving function works only when the al l PCs
are in the power-saving mode.