31
Chapter 5 Troubleshooting
Chapter 5 Troubleshooting

If a problem still remains after applyi ng the suggested remedies, contact your local dealer.

• No-picture problems → See No.1 - No.2.

• Imaging problems (digital input) → See No.3 - No.8.

• Imaging problems (analog input) → See No.3 - No.12.

• Other problems → See No.13 - No.16.

Problems Possible cause and remedy
1. No picture
• Power indicator does not light.
• Check whether the power cord is c onnected correctly.
• Turn off the main power, and then turn it on again a
few minutes later.
• Turn the main power switch on.
• Press .
• Power indicator lights blue. • Set ea ch adjusting value in <Brightness>, <Contrast>
and <Gain> to higher level. (page 20, 22)
• Power indicator lights orange. • Switch the input s ignal with .
• Operate the mouse or keyboard.
• Check whether the PC is turned on.
2. The message b elow appears. This message appears when the signal is not input
correctly even when the monitor functi ons properly.
• This message appears when no sig nal is input.
Example:
• The message shown left may appear, because so me
PCs do not output the signal soon after power-o n.
• Check whether the PC is turned on.
• Check whether the signal cable is c onnected properly.
• Switch the input signal with .
• The message shows that the input signal i s out of the
specied frequency range. (Such signal fre quency is
displayed in red.)
Example:
• Check whether the signal setting of yo ur PC matches
the resolution and the vertical f requency settings
for the monitor. (refer to the Setup Manual “Setting
Screen Resolution”)
• Reboot the PC.
• Select an appropriate display mode us ing the
graphics board’s utility. Refer to the manual of the
graphics board for details.
fD : Dot Clock
(Displayed only when the digital signal inputs)
fH : Horizontal Frequency
fV : Vertical Frequency
3. The screen is too b right or too dark. • Adjust using <Brightness> or <Cont rast>. (The LCD
monitor backlight has a xed life span. When the
screen becomes dark or begins to icker, contact you r
local dealer.)
• Turn on the Auto EcoView function. The monitor
detects the environmental brightness to adju st the
screen brightness automatically.