27
Chapter 3 Setting Monitor
3-5. Setting Language [Language]This function allows you to select a language for the adjus tment menu or displaying message.
Selectable languages
English/German/ French/Spanish/Italian/Swedish/Japa nese /Simplied Chinese/Traditional Chinese
Procedure
1. Choose <Menu Set tings> menu from the Adjustment menu, and press .
2. Choose <La nguage> from the <Menu Settings> menu, and pr ess .
3. Choose a la nguage with or .
4. Pre ss to exit the adjustment.
3-6. Setting Range of Frequency [Signal Bandwidth]Depending upon your operating envi ronment, it may be necessary to set the fr equency that corresponds
to your graphics board. If you install it for the rst time or change environment, set the monitor.
NOTE
• Refer to t he manual of the graphics board.
• The se environment described b elow can be set regardless of whether or not the compute r is running.
• On ly digital input signals can be set up.
Procedure
1. Pre ss to turn off the monitor.
2. Pre ss holding down at least 2 seconds to turn on the mon itor.
The Optional Settings me nu appears.
3. Choose <Sign al Baldwidth> from the <Optional Settings> me nu, and press .
Select “Normal” or “Wide” with or , and pre ss .
Use or to select (or just conrm) the frequency that corresponds to your graphics boa rd.
CG223W
Setting Ho rizontal scanning frequen cy (kHz) Vertical scanning frequ ency (Hz)
Normal 31 - 65 59 - 61
Wide 31 - 65 47.5 - 61
CG243W
Setting Ho rizontal scanning frequen cy (kHz) Vertical scanning frequ ency (Hz)
Normal 26 - 78 59 - 61
Wide-1 26 - 78 23.75 - 63
Wide-2/-3 *Used when inputti ng a special signal.
*:Wide-2/-3 cannot be selected when usin g DisplayPort.
4. Select “Finish” wit h or .
5. Pre ss to exit the Optional Sett ings.
The Optional Settings menu is closed.