Eizo CG245W - page 18

18 Chapter 2 Adjusting Screen
4 Perform advanced adjustments for the following using the <Screen> menu of
the <Analog Adjustment>.
Adjust the clock, phase and position, in this order.
● To eliminate vertical bars [Clock]
Procedure
1. Choose <Clock> from the <A nalog Adjustment> menu, and press .
2. Adjust the clock with or .
Press slowly so as not to miss the adjustment point.
3. Press to exit the adjustment.
When blurring, ickering or ba rs appear on the screen aft er adjustment, proceed to [Pha se] to remove ickering
or blurring.
● Remove ickering or blurring [Phase]
Procedure
1. Choose <Phase> from t he <Analog Adjustment> menu, and press .
2. Adjust the phase with or .
3. Press to exit the adjustment.
Attention
• Flickerin g or blurring may not be elimin ated depending on your PC or graph ics board.
● To correct screen position [Hor.Position] [Ver.Position]
NOTE
• Since the numb er of pixels and the pixel positions are xed on the LCD mon itor, only one position is provided to
display images correctly. The position adjustme nt is made to shift an image to th e correct position.
Procedure
1. Choose <Hor.Position> or <Ver.Position> from the <Analog Adjustment> menu, and press .
2. Adjust the position with or .
3. Press to exit the adjustment.