20 Chapter 2 Adjusting Screen

2-4. Color Adjustment

● To select the display mode (Color Mode)

Color Mode allows you to select easily the adequate mode suitable for the monitor’s application.

Color Mode

Mode Purpose
1-Custom Available for the color settings according to your preference.
2-Adobe®RGB Suitable for color matching with Adobe®RGB compatible peripherals.
3-sRGB Suitable for color matching with sRGB compatible peripherals.
4-EBU Suitable for reproducing the color gamut and gamma as set forth by EBU (European
Broadcasting Union) standards.
5-REC709 Suitable for reproducing the color gamut and gamma as set forth by the ITU-R Rec. 709
standard.
6-SMPTE-C Suitable for reproducing the color gamut and gamma as set forth by SMPTE-C stan-
dards.
7-DCI Suitable for reproducing the color gamut and gamma as set forth by DCI standards.
8-CAL1
9-CAL2
10-CAL3
Displays the screen adjusted by calibration software.
Attention
• “CAL” mode can be adjusted by usi ng the calibration software “ColorNavigato r” and SelfCalibration (page 32).
• With default sett ings only one CAL mode can be selected for ever y input signal displayed.
• A CAL mode will b e chosen by the ColorNavigator in accordance wit h the displayed input signal.
• Avoid operating any fu nciton of the monitor while using ColorNavigator.
The mode menu
appears.

Procedure

1. Press .

Mode menu appears at the lower left of the screen.

2. The mode among the lis t is highlighted in turn each t ime is pressed.

You can switch the current mode with or while the mode menu is being displayed.
Custom←→Adobe® RGB←→sRGB←→EBU←→REC709
CAL3←→CAL2←→CAL1←→DCI←→SMPTE-C
NOTE
• The Adjustme nt menu and the Mode menu cannot be displayed at the s ame time.
• You can disable a specic mode to be s elected. For more information, refer to “3-1. Enabling/ Disabling Mode
Selection [Mode Preset]” (page 27).