40 Chapter6Troubleshooting
6-4. Built-in correction sensor and SelfCorrection problems
Problem Possible cause and remedy
1. The built-in corr ection sensor does not
come out/stays out.
• Turnoffthemainpower,andthenturnitonagainafew
minuteslater.
• Ifaproblemstillremainsafterapplyingthes uggested
remedies,contactyourlocalEIZOrepresentat ive.
2. SelfCorre ction cannot be executed. •CheckwhethertheCol orNavigatorlicenseiscertied.
(See“TouseColorNavigator/ColorNavigatorElements”
(page10).)
• SettheSelfCorrectiontarg etusingColorNavigatoror
ColorNavigatorElements.
3. SelfCorrec tion failure • Refertotheerrorcodetable.Ifanerrorc odethatdoes
notappearintheerrorcodetableisdispl ayed,contact
yourlocalEIZOrepresentative.

Error Code Table

Error Code Description
0014 • ExecuteSelfCorrectionag ain.
• AdjustusingColorNavigatororColor NavigatorElements.
0034 • Thebuilt-incorrectionsen sormaynothavecomeoutduringcalibration,orlightmay
haveenteredthesensorduringmeasurement.
• Turnoffthemainpower,waitforafewminutesbeforeturningthepowerbackon,and
thenexecuteSelfCorrectionagain.
0050 • ExecuteSelfCorrectionag ain.
0061 • Thebuilt-incorrectionsen sormaynothavecomeout.
• Checkwhetherthereisanyforeignobjectneart hebuilt-incorrectionsensor.
• ExecuteSelfCorrectionagain.