41
Chapter7Reference
Chapter 7 Reference

7-1. Attaching the Optional Arm

An optional arm (or an optional stand) can be at tached by removing the stand section. Please refer to our web site
for the corresponding optional ar m (or optional stand). http://www.eizo.com
Attention
• W hen attaching an arm or s tand, follow the instruction s of their User’s Manual.
• W hen using another manufactu rer’s arm or stand, conr m the following in advance and select one confor ming to the VESA
standard.
- Clearance between the scre w holes: 100 mm × 100 mm
- Thickness of plate: 2.6 mm
- Strong enough to support weight of the mo nitor unit (except the stand) and attach ments such as cables.
• W hen using another manufactu rer’s arm or stand, use the following scre ws to secure it.
- Screws xing the stand to t he monitor.
• W hen using an arm or stand, at tach it to meet the following tilt angles of the mon itor.
- Up 45˚, down 45˚
• Con nect the cables after attach ing an arm or stand.
• Do not move the re moved stand up and down. Doing so may result in i njury or device damage.
• The mo nitor and arm or stand are heav y. Dropping them may result in injur y or equipment damage.
• W hen setting the monitor to the por trait style, turn t he monitor screen 90˚ in clockwise di rection.

Procedure

1. Lay the LCD monitor on a soft cloth spread over on a stable surface with the

panel surface facing down.

2.

Remove the stand.

Prepare a screwdriver. Loosen the screws (four) securing the u nit and the stand with the screwdriver.

3.

Attach the arm or stand to the monitor.

Secure the monitor to the arm or st and using the screws xing the stand to the mon itor.