12 Chapter2AdjustingScreens

2.

Prepare to use analog screen adjustment patterns.

Download the “Screen adjustment patter n les” from our site: http://www.radiforce.com.
Note
• For details and i nstructions on openi ng the “Screen adjustment pat tern les”, refer to the Readme.txt le.

3.

Perform the auto adjustment again with the analog screen adjustment pattern

displayed.

● To adjust ickering, screen position, and screen size automatically <Screen>
Procedure
1. Display Pattern 1 i n full screen on the monitor using the “Scre en adjustment pattern les”.
2. Choose <Auto Adjustment> f rom the Adjustment menu, and press .
3. Choose <Screen> f rom the <Auto Adjustment> menu, and press .
The <Auto Adjustment> menu appears.
4. Select <Execute> with or , and press .
Flickering, screen position, and scre en size are corrected by the aut o-adjustment function.
Ifthescreenisnotdisplayedcorrectlyevenafterper forming“3.Performtheautoadjustmentagain
withtheanalogscreenadjustmentpatterndisplayed.”(page12),performthead justmentsaccordingto
theproceduresonthefollowingpages.Ifthescree nisdisplayedcorrectly,goto“5.Adjustingcolor
gradation.”(page14).

4.

Choose <Screen> from the Adjustment menu to perform advanced

adjustments.

Adjust the clock, phase and position, in this order.
● To eliminate vertical bars <Clock>
Procedure
1. Choose <Clock> from the <Sc reen> menu, and press .
The <Clock> menu appears.
2. Adjust the clock with or to eliminate vertical bars.
Press or slowly so as not to miss the adjustment point.
3. Press to exit the adjustment.
When blurring, ickering or ba rs appear on the screen aft er adjustment, proceed to “Pha se” to remove ickering or
blurring.