
34 Chapter6Reference
Chapter 6 Reference6-1. How to Attach the Optional Arm
An optional arm (or an optional stand) can be attache d by removing the stand section. Please refer to our web
site for the corresponding optional arm (or optional stand). htt p://www.radiforce.com
Attention
• When at taching an arm or stand , follow the instructions of their u ser’s manual.
• When usi ng another manufacture r’s arm or stand, conrm the followin g in advance and select one conformi ng to the
VESA standard. Use the M4 × 12 mm screws supplied w ith this product.
- Clearance between the screw holes: 100 mm × 100 mm
- Thickness of plate: 2.6 mm
- Strong enough to support weight of the monitor u nit (except the stand) and attachment s such as cables.
• When usi ng an arm or stand, atta ch it to meet the following tilt angles of the monitor.
- Up 45°, down 45° (horizontal display, and vertical display rotated 90 degrees clock wise)
• Connect t he cables after attaching a n arm or stand.
• Do not move the removed stan d up and down. Doing so may result in injur y or device damage.
• The monitor a nd arm or stand are heavy. Dropping t hem may result in injury or equip ment damage.
Procedure
1. When using the monitor with “Portrait” position, change the position to
“Landscape”.
2.
Lay the LCD monitor on a soft cloth spread over on a stable surface with the
panel surface facing down.