38 Chapter6Reference
● To set input signal selection <Input Signal>
Setting Function
Auto Themonitorrecognizestheconnectorthroug hwhichPCsignalsare
input.
WhenaPCisturnedofforentersthepower-savingmode,themo nitor
automaticallydisplaysanothersignal.
Manual ThemonitordetectsonlythePC’ssignalscurrentlydis playing
automatically.Selectanactiveinputsignalwith .
Procedure
1. Choose <Other s> from the Adjustment menu, and press .
2. Choose <Input Signal> from t he <Others> menu, and press .
The <Input Signal> menu appears.
3. Select “Auto” or “Manual” with or .
4. Press to exit the adjustment.
Note
• When “Auto” is selected for <InputSigna l>, the monitor’s power-saving function works only when all PCs are i n the
power-saving mode.

6-4. Displaying Monitor Information <Information>

This function allows you to display the input signal statu s, current resolution and model name.
Information 1/3: Input signal status, re solution, and horizontal/ver tical scan frequencies
Information 2/3: DDC/CI Enable/Disable status
Information 3/3: Model name, serial number, and usage t ime
Procedure
1. Choose <Informat ion> from the Adjustment menu, and press .
The <Information> menu appears.
2. Then, press to check settings, etc.
Attention
• The usage t ime is not always “0” when you purchase the monitor due t o factory inspection.