15
Chapter2AdjustingScreens

2-3. Adjusting Color

● To select the display mode (CAL Switch mode)
This function allows easy selection of a desired mode accordi ng to monitor application.
Display Modes
Mode Purpose
Custom Availableformakingdesiredsetting.
sRGB SuitableforcolormatchingwithsRGBcomp atibleperipherals.
Text Suitablefordisplayingtextsforwordprocessingorspreadsheets.
DICOM AvailabletodisplayinDICOMmode.
Movie Suitableforplayingbackanimatedimages.
Displaysthecurrentmode.
Procedure
1. Press or .
A mode name appears at the lower left of the screen.
2. Change the mode by pressi ng or while the mode name is displayed.
→Custom←→sRGB←→Text←→DICOM←→Movie←
Note
• The Adjustme nt menu cannot be displayed when a mode name appe ars.
● To perform advanced adjustments
The <Color> menu of the Adjustment menu allows you to congure and save a separate set of color settings
for each mode.
Attention
• The monitor w ill take about 30 minutes before its inte rnal electric components st abilize. Wait 30 minutes or more
after turning the mon itor power on before starting adjust ment.
• Perform the r ange adjustment rst when adjust ing color for analog signals (see “To adjust color gradation
automatically <Range>” (page 14)).
• The same i mage may be seen in different colors on multiple mon itors due to their monitor-specic cha racteristics.
Make ne color adjustment visually when mat ching colors on multiple monitors.
Note
• The values shown i n “%” or “K” are available only as reference.