Eizo S1932 manual

●Setting auto-selection of the input signal [Input Signal]

Enable : When either PC is turned off or enters the power-saving mode, the monitor automatically displays signals of another PC.

Disable: The monitor does not detect the PC’s signals automatically. Switch an input signal with .

(1)Press .

The adjustment menu appears.

(2)Select (Tool).

(3)The Enable/Disable setting is toggled by selecting (Input Signal).

Enable

Disable

(4)Select .

The mode selected is set.

Note

•When “Enable” is selected for [Input Signal], the monitor’s power-saving function works only when the two PCs are in the power-saving mode.

Chapter 3 Connecting Cables 23

Image 25

Eizo S1932 manual Setting auto-selection of the input signal Input Signal

Contents

Contents Eizo Nanao Corporation To use the monitor comfortably Contents Features Features and Overview Indicator status Operation status Buttons and Indicators Or selecting to decrease it Example Operation method Icon Function Overview Adjustment menu icon list Selects a language for Utility Disk Disk contents and software overview Connection To use ScreenManager Pro for LCD Digital Input Screen Adjustment To eliminate vertical bars Clock To remove flickering or blurring Phase To correct screen position Position To select the display mode FineContrast mode Color AdjustmentMode Purpose Adjustment items in each mode To perform advanced adjustmentsTo adjust the brightness Brightness Icon Function FineContrast mode To adjust the gamma value Gamma To adjust the contrast Contrast To adjust the gain value Gain To adjust the color temperature TemperatureTo adjust the color saturation Saturation To set Enable/Disable of the contrast enhancer Cont Enhancer To adjust the hue Hue Turning off the monitor automatically Off Timer Adjusting Sharpness Sharpness Displaying Monitor Infomation Info1 Info2 Locking Buttons Key Lock Menu LockEnabling/Disabling DDC/CI communication DDC/CI Setting Language Language Setting Power Indicator ON/OFF Power LEDDisplaying Eizo logo To reset color adjustment values Resuming the Default Setting ResetTo reset all adjustments to the factory default settings To switch the input signal Connecting Two PCs to the MonitorConnection examples Setting auto-selection of the input signal Input Signal Message below appears Problems Possible cause and remedy No pictureScreen is too bright or too dark Characters are blurred Screen Adjustment menu does not appearOutline of the letters are colored Noise appears on the screen Attach the monitor to the arm or stand Attaching an Arm Cleaning Power Saving Mode Specifications Main default settings factory settings Outside Dimensions Height adjustable stand Outside Dimensions Tilt stand Outside Dimensions EZ-UP stand Outside Dimensions ArcSwing2 stand Pin No Signal Connector Pin AssignmentContact No Signal Remarks Option List Glossary Temperature ResolutionTmds Transition Minimized Differential Signaling SRGB Standard RGB Frequency Mode Dot clock Preset TimingPolarity Vertical Hz For more information, please visit FCC Declaration of Conformity Hinweis zur Ergonomie 4th Edition-March