4. Lead the power cord and signal cable into the cable holder at rear of the monitor.
● The cables are recommended to lead with slight sag for the smooth motion of the stand and the Portrait/
Landscape display.
5. Adjust the "height", "front and back position" and "angle" of the monitor.
Grip both side of the center part of the monitor and move
slowly (refer to the right figure.)
(1) Adjust the height of the monitor. To heighten, push the
monitor backward. To lower, pull the monitor forward.
(2) Adjust the position and angle of the monitor.
To adjust the angle of the monitor, hold the stand with one hand and tilt the monitor with another
hand by holding the upper side of the cabinet.