Eizo S2410W - page 45

4 short beeps Monitor not connected correctly.

PC turned off.

Monitor received unsupported signal frequency.

2 short beeps every 15 sec. Monitor is in the advance notice mode of the Off Timer.

The power will be off within fifteen minutes.

Dimensions

Pin Assignment

DVI-I Connector

Contents

Main Page SAFETY SYMBOLS Page PRECAUTIONS Page Page Page Page Page 1. Introduction 1-1. Features 1-2. Package Contents 1-3. Controls & Connectors Front Rear Page 2. CABLE CONNECTION 2-1. Before Connecting 2-2. Connecting the Signal Cable Page Page 2-3. Connecting Two PCs to the Monitor Connecting Examples The Priority Input Signal Selecting the Active Input Page 3. ScreenManager 3-1. How to use the ScreenManager 3-2. ScreenManager Adjustments and Settings 3-3. FineContrast To select the Mode Exit FineContrast Mode 3-4. Useful Functions Adjustment Lock Off Timer Power Indicator Setting EIZO Logo Appearing Function 4. ADJUSTMENT 4-1. Screen Adjustment Adjustment Procedure 1. Touch the Auto Adjustment Switch on the control panel. 2. Run the "Screen Adjustment Program". 3. Adjust by using <Screen> menu in the ScreenManager. Page 4-2. Displaying Lower Resolutions Set the <Border Intensity>. 4-3. Color Adjustment Adjustment Items Adjustment Contents 4-4. Power-save Setup Page 5. MAKING USE OF USB (Universal Serial Bus) Page 6. ATTACHING AN ARM Page 7. TROUBLESHOOTING 1. No picture 2. Error messages shown below will remain on the screen for 40 seconds. 3. Display position is incorrect. 4. Screen image is smaller or larger than the actual screen images. 11. Afterimages appear. 10. The screen is too bright or too dark. 5. Vertical bars of distortion appear. Page 20. PC is hung up. / The peripherals connected to the downstream ports do not operate. 21. USB function cannot be setup. 8. CLEANING Cabinet LCD Panel 9. SPECIFICATIONS Default settings Beeper settings Page Page 10. GLOSSARY sRGB Temperature TMDS VESA DPMS APPENDIX/ANHANG/ANNEXE