Allow the LCD monitor to stabilize for at least 20 minutes before making image adjustments. (Allow the monitor to warm up for at least 20 minutes before making adjustments.)

Performing the <Reset> of the <Color> menu returns the color settings of the selected mode to the default settings.

The values shown in percentages represent the current level within the specific adjustment. They are available only as a reference tool. (To create a uniform white or black screen, the percentages for each will probably not be the same.)

Adjustment Contents

Menu

 

Function Descriptions

 

Adjustable range

 

 

To set the brightness of the screen

0 ~ 100 %

Brightness

 

 

 

 

Directly touching the Up and Down switches also adjusts the brightness. Touch the Enter switch to save and exit the settings after the adjustment.

4,000 ~ 10,000 K

To set the color temperaturein 500 K increments (including 9,300 K). Default setting is off (normal white).

Temperature

The values shown in the Kelvin are available only as a reference tool.

Setting the temperature under 4,000 K or over 10,000 K invalidates the color temperature setting. (The color temperature's setting turns "OFF".)

Setting the <Gain> invalidates the <Temperature> adjustment. <Temperature> setting returns to the default.

To set the gamma value

1.4 ~ 3.0

Gamma

If setting the gamma value, the using the monitor in the digital signal input is recommended. If using the monitor in the analog input signal, set the gamma value from 1.8 to 2.2.

Saturation

Hue

-100 ~ 100

To change the saturationSetting the minimum level (-100) turns the image to the monochrome.

The <Saturation> adjustment may cause undisplayable color tone.

To change the flesh color, etc.

-100 ~ 100

Page 31
Image 31
Eizo S2410W specifications Adjustment Contents