Eizo S2410W 4. ADJUSTMENT

4. ADJUSTMENT

● Allow the LCD monitor to stabilize for at least 20 minutes before making image adjustments.

The monitor displays the digital input image correctly based on its pre-setting data.

Analog Input

Screen adjustments for the LCD monitor should be used in suppressing screen flickering and also for

adjusting the screen to its proper position. There is only one correct position for each display mode. It is

also recommended to use the ScreenManager function when first installing the display or whenever

changing the system. For convenience, an easy set-up Program installed on the utility disk to assist in the

set-up procedure is provided.

The message appears and remains on the screen for 5 seconds. While the message is on the screen, touch

the Auto Adjustment switch again to automatically adjust the clock, phase, screen position and resolution.

If you do not wish to do adjust the screen, do not touch the Auto Adjustment switch again.

● The Auto adjustment function is intended for use on the Macintosh and on AT-compatible PC

running Windows. It may not work properly in either of the following cases.

When running an AT-compatible PC on MS-DOS (Not windows). The background color for the

"wall paper" or "desktop" pattern is set to black.

If the appropriate screen cannot be made by using the Auto Adjustment switch, adjust the screen

through the following procedures. If the appropriate screen can be made, proceed to 4. Range

Adjustment .

Having read the "Readme.txt" file, run the "Screen Adjustment Program" in the enclosed EIZO LCD

Utility Disk. Step by step, adjustment is provided by the wizard guide. (If using the Windows, the program

can be directly run from the menu screen of the CD-ROM.)

● If the user's operating system has no utility disk (e.g. OS/2), we recommend setting the desktop