Eizo S2410W 2-3. Connecting Two PCs to the Monitor

2-3. Connecting Two PCs to the Monitor

Two PCs can be connected to the monitor through the DVI-I and the D-Sub mini 15 pin connector on the

back of the monitor.

Connecting Examples

SIGNAL 1 SIGNAL 2

(Ex.1) Analog D-Sub

mini 15

Signal Cable

(FD-C16 enclosed)

Signal Cable

(FD-C39 enclosed)

DVI Digital

(Ex.2) Analog D-Sub

mini 15

Signal Cable

(FD-C16 enclosed)

Signal Cable

(FD-C16 optional)

D-Sub

mini

15 pin Analog

(Ex.3) Digital DVI

Signal Cable

(FD-C39 enclosed) Signal Cable

(FD-C39 optional) DVI Digital

Selecting the Active Input

The Input Signal Selection switch on the control panel can be used to select either SIGNAL 1 or SIGNAL

2 as the active input at any time. Every time the switch is touched, the input changes. When switching the

signal, the kind of the input signal (Signal 1 or 2/ Analog or Digital) is displayed for a few seconds on the

right top corner of the screen.

The Priority Input Signal

Contents

Main Page SAFETY SYMBOLS Page PRECAUTIONS Page Page Page Page Page 1. Introduction 1-1. Features 1-2. Package Contents 1-3. Controls & Connectors Front Rear Page 2. CABLE CONNECTION 2-1. Before Connecting 2-2. Connecting the Signal Cable Page Page 2-3. Connecting Two PCs to the Monitor Connecting Examples The Priority Input Signal Selecting the Active Input Page 3. ScreenManager 3-1. How to use the ScreenManager 3-2. ScreenManager Adjustments and Settings 3-3. FineContrast To select the Mode Exit FineContrast Mode 3-4. Useful Functions Adjustment Lock Off Timer Power Indicator Setting EIZO Logo Appearing Function 4. ADJUSTMENT 4-1. Screen Adjustment Adjustment Procedure 1. Touch the Auto Adjustment Switch on the control panel. 2. Run the "Screen Adjustment Program". 3. Adjust by using <Screen> menu in the ScreenManager. Page 4-2. Displaying Lower Resolutions Set the <Border Intensity>. 4-3. Color Adjustment Adjustment Items Adjustment Contents 4-4. Power-save Setup Page 5. MAKING USE OF USB (Universal Serial Bus) Page 6. ATTACHING AN ARM Page 7. TROUBLESHOOTING 1. No picture 2. Error messages shown below will remain on the screen for 40 seconds. 3. Display position is incorrect. 4. Screen image is smaller or larger than the actual screen images. 11. Afterimages appear. 10. The screen is too bright or too dark. 5. Vertical bars of distortion appear. Page 20. PC is hung up. / The peripherals connected to the downstream ports do not operate. 21. USB function cannot be setup. 8. CLEANING Cabinet LCD Panel 9. SPECIFICATIONS Default settings Beeper settings Page Page 10. GLOSSARY sRGB Temperature TMDS VESA DPMS APPENDIX/ANHANG/ANNEXE