Switching off the timer
1. Select the required cooking zone.
The remaining time is indicated in the timer display.
The „timer function“ control lamp of the adjustable cooking zone flashes.
2. Set the time via the „heat setting selection“ 
sensor field to zero. 
appears in the timer display.
The timer is switched off.
Hob operation tips
Pots and pans
The better the pot, the better the cooking results.
•You can recognise good pots and pans by their bases. The base should be as thick and flat as possible.
•When buying new pots and pans, pay particular attention to the diameter of the base. Manufacturers often only state the diameter of the rim.
•Pots with aluminium or copper bases can cause metallic discolouring on the ceramic glass surface which is very difficult or impossible to remove.
•Do not use cast iron pots or pots with damaged bases which are rough and/ or have burrs on them. Scratches can occur if they are slid across the surface.
•When cold, pot bases are normally bowed slightly inwards (concave). They should never be bowed outwards (convex).
•If you use special pots and pans (e.g., a pressure cooker, simmering pan, wok etc.) please observe the manufacturer’s instructions.
24