Malfunction

 

 

Cause

 

 

 

Remedy

 

 

 

The cooking zones cannot

The child safety feature is

Switch off the child safety

be switched on.

 

switched on.

 

 

feature (see „child safety

 

 

 

 

 

 

feature“ section).

 

 

 

 

 

 

 

 

 

Since

switching

on

the

Switch the appliance back on.

 

 

appliance more

than

10

 

 

 

 

seconds have elapsed.

 

 

 

 

 

 

 

 

 

Since selecting the cooking

Re-select the cooking zone.

 

 

zone more than 10 seconds

 

 

 

 

have elapsed.

 

 

 

 

 

 

 

The cooking zones cannot

Since selecting the cooking

Re-select the cooking zone.

be switched off.

 

zone more than 10 seconds

 

 

 

 

have elapsed.

 

 

 

 

 

 

 

 

 

The residual heat

display

The power has failed for a

1.

Wait for the power cut to

does not display.

 

short time.

 

 

 

end.

 

 

 

 

 

 

Switching on the appliance.

 

 

 

 

 

 

The existing residual heat is no

 

 

 

 

 

 

longer displayed.

 

 

 

 

 

 

 

 

 

The

electronics

are

1.

Switch off the appliance.

 

 

defective.

 

 

2.

Disconnect the appliance

 

 

 

 

 

 

 

from the mains power

 

 

 

 

 

 

 

supply (remove fuse).

 

 

 

 

 

 

3. Call the Service Force

 

 

 

 

 

 

 

Centre.

 

 

 

 

The residual heat

display

The cooking zone was only

There is no malfunction if the

does not indicate anything.

switched on for a short

cooking zone is cold.

 

 

time.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The

electronics

are

1.

Switch off the appliance.

 

 

defective.

 

 

2.

Disconnect the appliance

 

 

 

 

 

 

 

from the mains power

 

 

 

 

 

 

 

supply (remove fuse).

 

 

 

 

 

 

3. Call the Service Force

 

 

 

 

 

 

 

Centre.

 

 

 

 

 

 

 

There was a power cut.

 

The existing residual heat is no

 

 

 

 

 

 

longer displayed.

 

 

 

 

 

 

 

 

32