Electrolux E43012-5 Synchronised oven shelf runners, Fitting the synchronised oven shelf runners

Using the Oven 17

Synchronised oven shelf runners

3To make it easier to pull out the oven shelf runners, the individual telescopic bars can be connected using a clamp.

Fitting the synchronised oven shelf runners

1When fitting the retaining clips, ensure

that the support brackets for the connect- ing clamp point towards the rear!

To fit the left-hand and right-hand retain- ing clips, affix to the appropriate telescopic bars to ensure that the upper groove fits securely into the rear retaining pins.

Push in retaining clips firmly until they en- gage.

Insert the connecting clamp into the rear support brackets of the retaining clips on the left- and right-hand telescopic bars (1.).

Press the connecting clamp into the locks of the two retaining clips by turning up- wards simultaneously(2.).

The telescopic bars can now be pulled out simultaneously.

Removing the synchronised oven shelf runners

To remove, follow the above steps in reverse.