Connecting the appliance to the power supply

The electrical outlet should be readily accessible so that the unit can be unplugged easily in an emergency.

The socket should not be positioned behind the cupboard.

The best position is above the cupboard, see (A).

When not connecting the power supply cord to position (A) it should be removed from the support clip (see diagram, item 13, on page 9) and routed under the oven.

(A)

Connect the appliance to a single phase 230-240 V/50 Hz alternating current via a correctly installed earth socket.

If the appliance is to be operated in a non-European country, the supply voltage, current type and frequency of the appliance indicated on the rating plate must correspond with the specification of your power supply. The rating plate can be found on the inside face of the control panel.

The power supply cord may only be replaced by an electrician.

electrolux installation 37

Before installing, tie a piece of string to the power supply cord to facilitate connection to point (A) when the appliance is being installed.

When inserting the appliance into the high-sided cupboard, DO NOT crush the power supply cord.

Electrical Connections

WARNING: THIS APPLIANCE MUST BE EARTHED.

The manufacturer declines any liability should this safety measure not be observed.

If the plug that is fitted to your appliance is not suitable for your socket outlet, it must be cut off and the appropriate plug fitted.

Remove the fuse from the cut off plug. The cut off plug should then be disposed of to prevent the hazard of shocks in case it should be plugged into a 13 Amp socket in another part of your home.

Page 37
Image 37
Electrolux EMS17206 user manual Connecting the appliance to the power supply, Electrical Connections