Pyrolytic cleaning
Warning: The oven gets very hot during this process. Keep small children away.
Important: Before carrying out the pyrolytic cleaning process, all re- movable parts, including the side rails, must be removed from the ov- en.
If you use the oven shelf runners that are available as special acces- sories, these must be removed be- fore pyrolytic cleaning.
If the side rails or oven shelf runners are still in place, ‘C1’ appears in the time display.
The pyroluxe process then cannot be started due to a safety
Performing Pyroluxe
1.First remove the worst of the residue manually.
2.Set the oven function dial to Pyroluxe .
–“Pyr 1” appears in the display.
3.Press the Pyrolyse time button. Pyrolytic cleaning then starts.
The Light does not work. When a
cleaning and care electrolux 43
The bars of the heat indicator light up, until the door is unlocked again.
Changing the length of Pyroluxe
1.Proceed as described in the section Performing Pyroluxe
2.As long as Cook time is flashing, select the Pyroluxe period using the
buttonPyrolyse time :
Button Pyrolyse time pressed once = “Pyr 1” or
Button Pyrolyse time pressed twice = “Pyr 2”.
Pyrolytic cleaning then starts.
If Cook time is no longer flash- ing, press the Selection button again and then perform the setting procedure.
Changing the Pyroluxe
The Pyroluxe
When the different Pyroluxes are set:
–“Pyr 1” - 3:15 = long Pyrolyse: for a high degree of soiling,
–“Pyr 2” - 2:15 = short Pyrolyse: for a light degree of soiling.