Elmo HV-7000SX Connection to the monitor and the projector, Connection to the RGB-in terminal

Connection to the monitor and the projector

Note: Be sure to turn OFF the power supply to all equipment before making any connections to protect the Presenter and all the connected equipment.

Note: Hold the cable plug part when connecting or disconnecting the cables.

Connection to the RGB-in terminal

Connect the RGB output terminal of the Presenter to the RGB input terminal of the equipment with the supplied RGB cable or a RGB connection cable available on the market.

If the display image shifts from the center, manually adjust the horizontal/vertical positions through the connected equipment.

If vertical stripes appear on the screen with the use of video projector, it may be improved by manually adjusting the dot-clock frequency of the projector.

Note: The resolution of the Presenter can be selected according to the resolution of the equipment to be connected.

Reference Page

• Resolution selection P.21

Projector

AC IN

OUTPUT

RGB OUT

INPUT

RGB1 AUDIO(L/R)1

OUTPUT

USB

S-VIDEO

R

L

AUDIO

RGB2 AUDIO(L/R)2

Monitor

12V0.9A

RS-232C

VIDEO

Connection to the composite video-in terminal

Use the supplied RCA video/audio cable.

AC IN		MOUSE CONTROL		OUTPUT
			RGB OUT
				R
OUTPUT		USB		L
			S-VIDEO	AUDIO
				VIDEO
12V	0.9A	RS-232C

Monitor

INPUT

RGB1 AUDIO(L/R)1

RGB2 AUDIO(L/R)2

Connection to the S-video-in terminal

Connect the S-video-out terminal (mini DIN 4P) of the Presenter to the S-video-in terminal of the monitor.

For the S-video mode, use the supplied 4P mini DIN cable or an S-video connection cable available on the market. If the equipment to be used is provided with a Y/C separate connector, a conversion adapter is necessary.

AC IN

OUTPUT

RGB OUT

INPUT

RGB1 AUDIO(L/R)1

Monitor

OUTPUT USB

S-VIDEO

R

L

AUDIO

RGB2 AUDIO(L/R)2

12V 0.9A

RS-232C

VIDEO

13