Elmo HV-7000SX instruction manual Various Functions, Lighting, Input selection

6. VARIOUS FUNCTIONS

Lighting

The upper lighting unit for presenting material such as printed matter and 3-D object, and the baselight for presenting transparent material, such as slide, and negative film, are built in the Presenter.

Depending on the material to be presented, press the button [UPPER] or [BASE] on the front operation panel or wireless remote control. The indication lamp will blink for a few seconds, and then the fluorescent lamp will light up.

To turn OFF the lamp, press the button for the respective lamp.

It has been so set before shipment that the lighting unit lights up when the power supply is turned ON.

Notes: · It is impossible to have the upper lighting unit and the baselight lit up together.

·When the lightness of the material surface is not sufficiently high or a 3-D object is presented, a sharp image with good color rendering can be obtained with the upper lighting unit.

·To reduce glare, attach enclosed stickers, as shown, to the outside ends, of toplights.

Front operation panel

Wireless remote control

Input selection

The respective images from two different AV sources, such as PC and ELMO Presenters [HD-80XG], can be alternately presented on the Monitor by simply selecting the AV source by pressing the input selection button without changing cable connections.

Press the input selection button [RGB1] / [RGB2] on the front operation panel or wireless remote control.

When the input is selected, the signal is outputted as shown in the following page.

Front operation panel

Wireless remote control

20