ELSA Cable manual Setup/SNMP-module, Setup/DHCP-server-module

Description of the menu options R10

Network masks and IP addresses of 0.0.0.0 can be used as “wildcards“. Specified computers and networks may be simultaneously subjected to targeted filtering while others pass the router unfiltered.

The tables are processed from top to bottom. As soon as a matching filter is found, the packet is handled accordingly.

Setup/SNMP-module

This menu allows you to enter settings for configuration of the device via SNMP. The menu has the following layout:

/SNMP-module	SNMP module settings
Send-Traps	Switch for issuing SNMP traps
IP-Trap-Table	Table with 20 destination addresses for trap messages
Administrator	Device administrator
Location	Device location

Send-Traps

IP -Trap-Table

Administrator

Location

This entry controls trap output (No/Yes).

Specifies the IP addresses to which the trap messages will be sent.

Administrator's name

Device location

Setup/DHCP-server-module

This menu allows you to enter settings for the DHCP server. The menu has the following layout:

	/DHCP-server-module	DHCP server settings
	Operating	Switch for activating the DHCP module
	Start-address-pool	Start address for the address pool
	End-address-pool	End address for the address pool
	Netmask	Network mask for the address pool
	Broadcast-address	Broadcast address for the LAN
	Max.-lease-time-minute(s)	Maximum period of validity for the address assignment
		via DHCP
	Default-lease-time-minute(s)	Default period of validity for the address assignment via
		DHCP
	Table-DHCP	Table of current assignments via DHCP
Operating	On: The device operates as a DHCP server.

ELSA MicroLink Cable