ELSA Cable manual Configuration commands, This command Means this For instance

Configuration modes 19

Configuration commands

Enter commands and path specifications using the normal DOS or UNIX conventions if you are using telnet or a terminal program to configure the device.

Enter a forward slash or backslash to separate the path specifications. You do not need to write out commands and table entries in full; an unambiguous abbreviation will do.

The entries for the categories MENU, VALUE, TABLE, TABINFO, ACTION and INFO will be displayed while configurations are made and may be modified. You can use the following commands to do this:

This command ...	... means this ...	... for instance:
? or help	Calls up help text	-
dir, list, ll, ls <MENU>,	Displays the contents of MENU,	dir/status/wan-statistics displays the
<VALUE> or <TABLE>	VALUE or TABLE	current WAN statistics
cd <MENU> or <TABLE>	Switches to the MENU or TABLE	cd setup/tcp-ip-module (or cd se/tc
	specified	for short) switches to the TCP/IP mod-
		ule
set <VALUE>	This resets the VALUE.	set IP-address 192.110.120.140 sets a
		new IP address
	Insert a space between all	set /setup/name AACHEN assigns
	entries in table rows. An *	the name 'AACHEN' to the device.
	leaves the entry unchanged.
set <VALUE> ?	Shows you which values can be
	specified here
del <VALUE>	Deletes a table row.	del /se/wan/nam/AACHEN
		Deletes the entry for the remote sta-
		tion AACHEN.
do <ACTION>	Executes the ACTION according	do /firmware/firmware-upload starts
(parameters)	to any parameters specified,	the upload of new firmware.
passwd	Allows a new password to be
	specified. The old password, if
	there is one, must be entered
	first. The new password must
	then be entered twice and con-
	firmed each time with y.
repeat <sec> <ACTION>	Repeats the ACTION at an inter-	repeat 3 dir/status/wan-statistics
	val of the number of seconds	displays the current WAN statistics
	specified. Any key can be used	every 3 seconds
	to terminate the repetition.
time	Sets the system time and date.	time 24.12.1998 18:00:00
language <language>	Sets the language for the cur-	Languages currently supported:
	rent configuration session.	English (language english)
		German (language deutsch)
exit, quit, x	Configuration is terminated.

English

ELSA MicroLink Cable