ELSA Cable manual Setup/TCP-IP-module, Description of the menu options R91, MAC-address field

Description of the menu options R91

The pos setting for broadcast or multicast may lead to higher charges depending on the pricing model of the cable network operator during due to the higher data volume transferred.

Setup/Bridge-module/LAN-configuration/Dest.-addresses

This menu item enables all settings required to filter destination addresses.

/Dest.-address	Destination address filtering
Filter-type	Positive or negative filter
Filter-table	Processing of address filter table

Filter-type	The filter type to be used for the destination address list may be specified here. The
	settings pos are possible, so only data packets whose destination address is included in
	the destination address filter table will be transferred. The setting neg default value
	transfers all frames whose destination addresses are not included in the destination
	address filter table.
Filter-table	The destination addresses can be administered in this table. Entries simply comprise the
	MAC-address field.
	Dest
	0000c051d266

Setup/Bridge-module/LAN-configuration/Source-addresses

The settings for source addresses are made in the same way as the settings for the destination addresses.

Setup/Bridge-module/cable-configuration

This option allows you to select the settings for cable data packets. The settings in this menu are exactly the same as the settings in the LAN-configurationmenu except that they serve to filter the data packets received from the cable network.

Setup/TCP-IP-module

This menu allows you to enter settings for the TCP/IP module. The menu has the following layout:

/TCP-IP-module	TCP/IP module settings
Operating	Activates or deactivates the TCP/IP module.
Cable IP address	IP address of the device in the cable network
Cable-IP-netmask	Cable network’s matching IP network mask
LAN-IP-address	IP address for the device in the local network (LAN)

ELSA MicroLink Cable