Other, R106 Description of the menu options | ELSA Cable guide

R106 Description of the menu options

–If the device no longer responds and it is therefore impossible to log in, the firmware automatically loads the previous firmware version and reboots the device with it.

K'manual': The third option allows you to set a period (Timeout firmsafe) beforehand for testing the new firmware. The device will start with the new firmware and wait for the preset period until the loaded firmware is manually activated and therefore becomes permanently effective.

Other

The Other menu allows you to manage the following functions:

/Other				Various functions
Boot-system				Boots the device


Factory-default-				Resets to factory settings
system
system
Upload-system				Loads new firmware

Boot-system

Factory-default- system

Upload-system

This option allows you to reboot the device.

Before executing the command all open connections will be released or closed. The device must log back on with the network operator after rebooting.

This option resets all the settings that have been entered. The device is reset to the factory settings.

For security reasons, the system prompts you to enter the configuration protection password in order to ensure that you have not mistakenly selected this command instead of the Boot-systemcommand. If no password has been assigned, you must press Enter a second time.

This option starts a firmware upload (refer to chapter 'How to load new software').

The flash ROM technology permits flexible and service-friendly handling of the system software by allowing different firmware versions to be read in. It also allows devices to be retrofitted with all future options.

ELSA MicroLink Cable

Image 114

ELSA Cable manual R106 Description of the menu options, Other menu allows you to manage the following functions

Contents

Manual Aachen ELSA, IncSonnenweg Germany Thank you for placing your trust in this Elsa product Introducing the Elsa MicroLink CablePage Content Elsa Cable Modem VI Content Setup/SNMP-module Viii Content What does the unit look like? Introducing the Elsa MicroLink CableElsa MicroLink Cable Meanings of the specific blink codes Sync BC D E F G These LEDs show the corresponding network controller status Fast Internet Highlights of the Elsa MicroLink CableNode or hub? Cable network More than just Internet Regional contentInternet at all times-always online Backbone Proxy servers CE conformity and FCC radiation standard CE and FCC Introducing the Elsa MicroLink Cable Installation and configuration Elsa MicroLink Cable Configuring the Elsa MicroLink Cable First Steps Quick Start Quick configurations Configuration as a bridgePreparations LAN Configuration as a router Off you go into the Web with a whole new sensation of speed On the Router tab, enable the IP Router option TCP/IP installation Configuring fixed IP addresses not using DhcpObtain IP addresses automatically use Dhcp Checking the IP configuration Requirements for inband configuration Configuration modesUser-friendly method inband Starting inband configuration using Elsa LANconfig Start up inband configuration using telnet Configuration commands This command Means this For instance Set/se/snmp/admin The Administrator Whats happening on the line? How to start a traceCommand to call up a trace follows this syntax Trace Outputs New firmware with FirmSafe This is how FirmSafe worksExamples How to load new software Elsa LANconfig Configuration using Snmp General Tftp Accessing tables and parameters using Snmp Access protection in SnmpCommand Target/Source Function Deleting rows in tables using Snmp Appending rows to tables using SnmpIP address IP-netmask Router name Distance Error messages via Snmp trap Management Information Base MIB Configuration modes Login barring Security for your configurationPassword protection Operating modes and functions Access control via TCP/IP Security for your LANGlobally to Encryption TCP/IP packet filtersHiding place-IP masquerading NAT, PAT IP routing IP routing tableIP address IP netmask Router Dis Tance IP address IP netmask Router name Dist This is what happens 192.168.130.0 255.255.255.0 What do the entries mean? Dynamic routing with IP/RIPWhat information is propagated by IP/RIP? IP address IP netmask Time Distance Router Local routing Interaction of static and dynamic tables IP masquerading NAT, PAT Two addresses for the router Cable TV net How does IP masquerading work?Simple and inverse masquerading Work Which protocols can be transmitted using IP masquerading? DNS forwardingOnly small difference is that Bridging Rator Automatic address administration with Dhcp What are the filter options? Cable modem really belongs to two LANs Dhcp clientDhcp server IP address Network mask Broadcast address How are the addresses assigned? Default state is autoDhcp on, off or auto? IP address assignment Broadcast address assignment Default gateway assignmentNetwork mask assignment DNS server assignment Priority for the Dhcp server Request assignment Priority for a workstation-overwriting an assignment Operating modes and functions Operating modes and functions Elsa MicroLink Cable Cable modem technology AccessTwo standards get around this problem Standards Registration in the cable network Network of the cable network Cable TV netOperator Work Registration Network technology Network and its componentsConnection modes Host IP addressing Kinds of networks Examples Same IP address, this time with another netmaskThis address Bytes Looks like this in bits IP address Netmask Remark 10.0.0.0 255.0.0.0 There are two considerations when using these IP addresses IP routing and hierarchical IP addressing Host Smith External host Marketing Example Expansion through local networks Easy as possible Why a LAN is called multiprotocol-capable80-C7-6D-A4-6E That is processed by all computers in the LAN Data transfer within the LAN Interface only understands MAC addressesLAN as easy as possible Host Smith Data transfer from the LAN onto the Internet LAN coupling on MAC basis Technical basics Elsa MicroLink Cable Technical data Appendix Package contents Service Warranty period Warranty conditionsWarranty coverage Warranty procedure Operating mistakes Additional regulations Declaration of conformity Typenbezeichnung Appendix Elsa MicroLink Cable Index 17, 32 Inde7032, 40 Gateway Heap reserve 17, 18 Setup Trace Wireless links Inde72 Symbols Description of the menu options R73 R74 Description of the menu options Overview of the menus Status Description of the menu options R75Status Running status displays Status/Cable-statistics Status/Operating-timeStatus/Current-time R76 Description of the menu options Status/LAN-statistics Description of the menu options R77LAN-statistics Running status displays Cannot be modified manually Status/Bridge-statisticsR78 Description of the menu options Bridge-statistics Running status displays Status/TCP-IP-statistics/ARP-statistics Status/TCP-IP-statisticsDescription of the menu options R79 These statistics include the following values R80 Description of the menu options Status/TCP-IP-statistics/IP-statisticsStatus/TCP-IP-statistics/ICMP-statistics Description of the menu options R81 Status/TCP-IP-statistics/TCP-statisticsStatus/TCP-IP-statistics/TFTP-statistics R82 Description of the menu options Status/TCP-IP-statistics/DHCP-statistics Shrinks accordingly. It has the following layout Status/IP-router-statisticsDescription of the menu options R83 IP-router-statistics Statistics from the IP router area Protocol LAN-tx Cable-tx R84 Description of the menu optionsStatus/IP-router-statistics/RIP-statistics IP-address IP-netmask Time Distance Router Status/Queue-statistics Status/Config-statisticsConfig-statistics Remote configuration statistics Description of the menu options R85 R86 Description of the menu options IPr-RIP-queue-packets Description of the menu options R87 Status/MCNS-statisticsStatus/Init-status MCSN-statistics Status/DHCP-client-statistics SetupSystem configuration R88 Description of the menu options Entering the following command Setup/Cable-moduleSetup/LAN-module Default configuration, no name is entered Setup/Bridge-module R90 Description of the menu options Setup/TCP-IP-module Description of the menu options R91MAC-address field Configuration, the TCP/IP module is activated R92 Description of the menu options Description of the menu options R93 IP-address Node-ID Last-access Connect Setup/IP-router-moduleConfiguration, the IP router module is activated IP-router-module IP router module settings Description of the menu options R95 IP-address IP netmask Router-name Distance Setup/IP-router-module/Routing-method Routing-method Routing method settingsR96 Description of the menu options Settings have the following meaning Setup/IP-router-module/RIP-configurationDifferent settings have the following meaning Description of the menu options R97 Setup/IP-router-module/Masquerading R98 Description of the menu optionsFollowing layout Setup/IP-router-module/firewall Description of the menu options R99 R10 Description of the menu options Description of the menu options R10 Setup/SNMP-moduleSetup/DHCP-server-module On The device operates as a Dhcp server Off The device does not operate as a Dhcp server Default value of 6000 minutes equals approximately 4 daysR102 Description of the menu options Network mask is assigned in the same way as the IP address Config-module Configuration module settings Setup/Config-moduleIP-address Node-ID Timeout Hostname Type Description of the menu options R103 Firmware Display and keyboard settings FirmwareR104 Description of the menu options Description of the menu options R105 Module VersionPosition Status Version Date Size Index R106 Description of the menu options This option allows you to reboot the deviceOther Other menu allows you to manage the following functions