Before You Begin
1.3Flowmeter components
The Model 2400S transmitter is mounted on a Micro Motion sensor. The transmitter and sensor together comprise the Micro Motion flowmeter.
Figure
Figure 1-1 Model 2400S transmitter
Conduit openings | Transmitter housing cover |
Sensor case
Clamping ring
1.4Transmitter installation overview
The Model 2400S transmitter component is mounted integrally with the sensor and grounded via the sensor. To install and ground the sensor, see the sensor documentation.
Additional transmitter installation steps are documented in this manual:
•Rotate the transmitter on the sensor (optional) – see Chapter 2
•Rotate the user interface module on the transmitter (optional) – see Chapter 2
•Wire and ground the transmitter’s power supply – see Chapter 2
•Wire the transmitter I/O:
-For the Model 2400S Analog transmitter, see Chapter 3
-For the Model 2400S
2 | Micro Motion® Model 2400S Transmitters |