Figure
–
+
Figure
PLC or
other device
–
+
–
+
VDC | OR | Direct DC input |
(see Table |
| (see Table |
3.5Wiring the outputs (Zone 1 Exi)
The following notes and diagrams are intended to be used as a guide for installing the 2400S Analog transmitter with Zone 1 Exi approval.
WARNING
Hazardous voltage can cause severe injury or death.
To avoid the risk of hazardous voltage, shut off the power before wiring the transmitter outputs.
20 | Micro Motion® Model 2400S Transmitters |