Emerson Dimensions and Specifications, Model 2400S Analog Zone 1 Exi, Model 2400S PROFIBUS-DP

Dimensions and Specifications

Model 2400S Analog (Zone 1 Exi)

Channel A One passive 4–20 mA output

•Intrinsically safe

•Isolated to ±50 VDC from all other outputs and earth ground

•Maximum load limit: 820 ohms

•Can report mass flow, volume flow, density, temperature, or drive gain

•Output is linear with process from 3.8 to 20.5 mA, per NAMUR NE43 (June 1994)

Channel B (configurable) One passive 4–20 mA output

•Intrinsically safe

•Isolated to ±50 VDC from all other outputs and earth ground

•Maximum load limit: 820 ohms

•Can report mass flow, volume flow, density, temperature, or drive gain

•Output is linear with process from 3.8 to 20.5 mA, per NAMUR NE43 (June 1994)

One passive frequency/pulse output

•Intrinsically safe

•Can report mass flow or volume flow, which can be used to indicate flow rate or total

•Scalable to 10,000 Hz

•Power: External (passive): +36 VDC maximum, +24 VDC typical

•Output is linear with flow rate to 12,500 Hz

One passive discrete output

•Intrinsically safe

•Can report five discrete events, flow switch, forward/reverse flow, calibration in progress, or fault

•Power: External (passive): +36 VDC maximum, +24 VDC typical

•Maximum sink capability: 500 mA

One passive discrete input

•Intrinsically safe

•Power: External (passive): +3 to 36 VDC maximum

•Can reset all totals, reset mass total, reset volume total, or start sensor zero

Entity parameters

			Value
			Frequency/
	Parameter	4–20 mA output	discrete output
	Voltage (Ui)	36 V	36 V
	Current (Ii)	500 mA	500 mA
	Power (Pi)	1.5 W	1.5 W
	Capacitance (Ci)	1.1 nF	1.1 nF
	Inductance (Li)	0.0 mH	0.0 mH
Model 2400S PROFIBUS-DP	Digital 2-way PROFIBUS-DP signal.
	Certified by PNO.
Model 2400S DeviceNet	Digital 2-way DeviceNet signal.
	Certified by ODVA.

Specifications

Return Policy

Index

Installation Manual 37