Liebert iCOM Display Components and Functions
4.7Entering Network Setup Information
Setting up a U2U network requires setting a unique IP addresses for each unit, choosing a U2U address and designating the U2U group. Refer to Figure 17 for the setup screen for the control board (installed inside the Liebert Challenger 3000/Liebert Challenger ITR) and Figure 18 for the setup screen for the Liebert iCOM on the front of the Liebert Challenger 3000/Liebert Challenger ITR.
Figure 17 Control board U2U network setup screen
| SYSTEM/NETWORK SETUP (page 2 of 2) |
| SYSTEM | |
|
|
|
|
|
|
| PASSWORD (Actual Level 3) |
| ???? |
| S834 |
| ||
| S835 | Monitoring Protocol |
| Velocity |
| S836 | IP Address | 126.001.060.212 | |
| S837 | Netmask | 255.255.255.192 | |
| S838 | Gateway | 126.001.060.213 | |
| S839 | MAC | 00:00:68:19:02:03 | |
| S840 | U2U Protocol |
| GBP |
| S841 | U2U Address |
| 1 |
| S842 | U2U Group |
| 15 |
| S843 | Bootloader Variables | OK | No |
| S844 | Static RAM | OK | No |
|
|
|
|
|
|
|
|
|
|
Attention: any changes done on these parameters must be followed by a 'Save+Reboot' command
Figure 18 Liebert iCOM display U2U network setup screen
| SYSTEM/NETWORK SETUP (page 2 of 2) |
| SYSTEM | |
|
|
|
|
|
|
| PASSWORD (Actual Level 3) |
| ???? |
| S812 |
| ||
| S813 | IP Address | 126.001.060.212 | |
| S814 | Netmask | 255.255.255.192 | |
| S815 | Gateway | 126.001.060.212 | |
| S816 | MAC | 00:00:68:19:21:23 | |
| S817 | U2U Protocol |
| GBP |
| S818 | U2U Address |
| 33 |
| S819 | U2U Group |
| 15 |
| S820 |
|
|
|
| S821 | Bootloader Variables | OK | No |
| S822 |
|
|
|
|
|
|
|
|
|
|
|
|
|
Attention: any changes done on these parameters must be followed by a 'Save+Reboot' command
25