Emerson 644 Block Errors, 8lists conditions reported in the Blockerr parameter, Resource Block

Reference Manual

00809-0400-4728, Rev AA June 2011

Rosemount 644

Resource Block

Table 3-8. Resource Block BLOCK_ERR messages

Table 3-9. Resource Block SUMMARY_STATUS messages

This section describes error conditions found in the Resource block. Read Table 3-8through Table 3-10to determine the appropriate corrective action.

Block Errors

Table 3-8lists conditions reported in the BLOCK_ERR parameter.

Condition Name and Description

Other

Device Needs Maintenance Now

Memory Failure: A memory failure has occurred in FLASH, RAM, or EEPROM memory.

Lost NV Data: Non-volatile data that is stored in non-volatile memory has been lost. Device Needs Maintenance Now.

Out of Service: The actual mode is out of service.

Condition Name

No repair needed

Repairable

Call Service Center

Table 3-10. Resource Block

RB.DETAILED_STATUS	RB.DETAILED_STATUS	Description
	Sensor Transducer block error.	Active when any SENSOR_DETAILED_STAUS bit is on.
	Manufacturing Block integrity error	The manufacturing block size, revision, or checksum is
		wrong.
	Hardware/software incompatible	Verify the manufacturing block revision and the hardware
		revision are correct/compatible with the software
		revision.
	Non-volatile memory integrity error	Invalid checksum on a block of NV data.
	ROM integrity error	Invalid application code checksum.
	Lost deferred NV data	Device has been power-cycled while non-volatile writes
		were being deferred to prevent premature memory
		failure, the write operations have been deferred.
	NV Writes Deferred	A high number of writes has been detected to
		non-volatile memory. To prevent premature failure, the
		write operations have been deferred.

3-23