Emerson 644 Primaryvaluerange, Primaryvaluetype, Sensrdetailedstatus, Calvandusencoeff, Sensorsn

	Reference Manual
Rosemount 644	00809-0400-4728, Rev AA
	June 2011

Table C-2. Sensor Transducer Block Parameters and Descriptions

	Index			Notes on how changing this parameter
Parameter	Number	Description		effects transmitter operation.
PRIMARY_VALUE_RANGE	15	The high and low range limit values, the		No effect.
		engineering unit code, and the number of digits
		to the right of the decimal point to be used to
		display the final value.
		Valid engineering units are the following:
		1130	= Pa
		1133	= kPa
		1137	= bar
		1138	= mbar
		1139	= torr
		1140	= atm
		1141	= psi
		1144	= g/cm2
		1145	= kg/cm2
		1148	= inH2O @ 68 °F
		1151	= mmH2O @ 68 °F
		1154	= ftH2O @ 68 °F
		1156	= inHg @ 0 °C
		1158	= mmHg @ 0 °C
PRIMARY_VALUE_TYPE	13	Type of measurement represented by the		No effect.
		primary value.
		107 = Differential pressure
		108 = Gage pressure
		109 = Absolute pressure
SENSR_DETAILED_STATUS	37	Indicates the number of remote seals that are
		attached to the device. See Remote Seal
		Number Codes.
CAL_VAN_DUSEN_COEFF	38	Indicates the type of remote seals that are
		attached to the device. See Remote Seal Type
		Codes.
SECONDARY_VALUE_RANG	30	The secondary value, related to the sensor.		No effect.
SECONDARY_VALUE_UNIT	29	Engineering units to be used with		No effect.
		SECONDARY_VALUE.
		1001 °C
		1002 °F
SENSOR_CAL_DATE	25	The last date on which the calibration was		No effect.
		performed.This is intended to reflect the
		calibration of that part of the sensor that is
		usually wetted by the process.
SENSOR_CAL_LOC	24	The last location of the sensor calibration. This		No effect.
		describes the physical location at which the
		calibration was performed.
SENSOR_CAL_METHOD	23	The method of last sensor calibration.		No effect.
OPEN_SNSR_HOLDOFF	34	The type of last sensor calibration.		No effect.
SENSOR_CAL_WHO	26	The name of the person responsible for the last		No effect.
		sensor calibration.
SECONDARY_VALUE	28	Defines the type of fill fluid used in the sensor.		No effect.
SENSOR_CONNECTION	27	Defines the construction material of the isolating		No effect.
		diaphragms.
SENSOR_RANGE	21	The high and low range limit values, the		No effect.
		engineering units code, and the number of digits
		to the right of the decimal point for the sensor.
SENSOR_SN	22	Serial number of the sensor.		No effect.
SENSOR_TYPE	20	Type of sensor connected with the transducer		No effect.
		block.
ST_REV	01	The revision level of the static data associated		No effect.
		with the function block.

C-6