Emerson LXP48F1 ACCESSORY INFORMATION Distribution Devices, Bullet Nose Type Circuit Breakers

SAG582135000	System	Application Guide
Issue AE, January 31, 2007	Spec. No. 582135000	(Model LXP48F1)

ACCESSORY INFORMATION Distribution Devices

Home

Bullet Nose Type Circuit Breakers

Each circuit breaker plugs into a single mounting position.

Ordering Notes

1)Order circuit breakers per Table 1.

Note: Load should not exceed 80% of device rating.

Caution: A circuit breaker with a rating greater than 75 amperes SHALL HAVE an empty mounting position between it and any other overcurrent protective device.

Caution: The maximum size circuit breaker used in ambient temperatures above +50°C ambient shall be 40 amperes.

2)Order one (1) Part No. 524690 mounting kit for each circuit breaker ordered.

3)For lug and wire size selection, refer to Table 4.

BULLET NOSE TYPE CIRCUIT BREAKERS

	PART NUMBER	PART NUMBER
AMPERE	Electrical/	Electrical Trip2
RATING	Mechanical Trip1	(White Handle)
	(Black Handle)
1	101596	102272
3	101597	102273
5	101598	102274
10	101599	102275
15	101600	102276
20	101601	102277
25	101602	102278
30	101603	102279
35	101604	102280
40	101605	102281
45	121997	121998
50	101606	102282
60	101607	102283
70	101608	102284
75	101609	102285
80	121995	121996
100	101610	102286

Circuit Breaker Alarm Operation:

1Provides an alarm during an electrical or manual trip condition.

2Provides an alarm during an electrical trip condition only. Unless otherwise specified, breakers are to be mounted from right to left starting with the highest capacity and working to the lowest capacity.

Table 1

Page 18 of 43

This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy

Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.