Empire Comfort Systems DVP48FP9(1,3)(N,P)-1, DVP48FP3(0,1,2,3)(N,P)-1 Vent System Identification

VENT SYSTEM IDENTIFICATION

Installing Vent Components (Figure 36)

Begin the vent system installation by installing the first Simpson Duravent component, 90° elbow to the starting collars or straight pipe on the top of the appliance, then the straight pipe length and then horizontal or vertical termination kit.

NOTE:Allouterconnectionjointsmustbesealedwithaluminum tape, screws or silicone sealant rated above 300°F/149°C. The inner flue joints do not require any sealant.

Simpson Duravent vent system components lock into place by

sliding the concentric pipe section with four (4) equally spaced interior beads onto the appliance collar or previously installed component end with four (4) equally spaced indented sections. When the internal beads of each starting outer pipe line up, rotate pipe section clockwise 90° (approximately 3 inches). The vent pipe is now locked together.

Continue adding components per the pre-planned vent system configuration. Be certain that each succeeding vent component is securely fitted and locked into the preceding component in the vent system.

WALL THIMBLE

(MAXIMUM OF THREE 90 ELBOWS)

(MAXIMUM OF TWO 90 ELBOWS)

Special DV Vent Kits - Simpson Duravent and Empire Comfort Systems, Inc.

Can be purchased from Empire Comfort Systems, Inc.

DVVK-5R	Direct-Vent Fireplace Vent Kit for Rear Vent, 6 to 12 inch wall
	thickness, Includes SD-1208, SD-1247, and SD-2184
DVVK-5T	Direct-Vent Fireplace Vent Kit for Top Vent, Thru-the-wall, 4
	to 6 inch wall thickness, Includes SD-1290, SD-1284, SD-1208
	and SD-1247
DVVK-5V	Direct Vent Fireplace Vent Kit - Vertical, Includes SD-1291,
	SD-1253, and SD-1243
	Figure 36

Special Venting Components

Simpson Dura-Vent

Can be purchased from Simpson Duravent or from

Empire Comfort Systems, Inc.

Part Number	Description
SD-1208	6" Pipe Length
SD-1207	9" Pipe Length
SD-1206	12" Pipe Length
SD-1204	24" Pipe Length
SD-1203	36" Pipe Length
SD-1202	48" Pipe Length
SD-1211	Adjustable Pipe Length 11 - 14 5/8"
SD-1284	Horizontal Square Termination Cap
SD-1250	Vinyl Siding Standoff
SD-1245	45° Elbow
SD-1290	90° Elbow
SD-1249	Wall Firestop
SD-1263	Ceiling Firestop
SD-1243	Roof Flashing - 0/12 to 6/12 Roof Pitch
SD-1253	Storm Collar
SD-91291	High Wind Vertical Top
SD-1281	36" Snorkel
SD-1282	14" Firestop Snorkel
SD-1247	Wall Thimble Firestop

17375-10-0706 Page 23