Vermont Casting RHEDV42, RHEDV25, RHEDV32 installation instructions KT210

Vermont Castings, Majestic Products RHEDV Direct Vent Insert

On units fitted with a Honeywell brand control valve the location of the control knobs and the ignitor button may vary slightly from those shown in Figure 49. The Honeywell exten- sion pieces are visually different in design and are not interchangeable with the RN/RP knobs shown in Figure 49.

2.Install the hanging brackets, as shown in Figure 50.

3.Install bracket on each side of the cabinet as shown in Figure 54.

4.Install the two ceramic pieces inside the bay window, as shown in Figure 46.

5.Install the bay window by hanging it onto the lower tabs of the hanging brackets, as shown in Figure 51.

6.Install top louvre by engaging the oblong holes with the upper tabs of the hanging brackets, as shown in Figure 52.

7.Install brass trim to the steel frame as shown in Figure 53.

Fan Control Box

KT205

Fig. 47 Remove fan control box.

Fan Control

Box

Extension

Bracket

KT207

Fig. 48 Attach the control box to the bracket and install bracket into the cabinet.

Extension

Knobs

KT204a

Fig. 49 Install the knob extensions. (Only for RN/RP models)

32

Hanging Bracket

	KT209a
Fig. 50	Hanging bracket alignment.
	KT210

Fig. 51 Hang the window grille or the steel frame onto the lower tabs fo the hanging brackets.

KT211

Fig. 52 Engage the slots in the upper grille top louvre witht he upper tabs of the hanging bracket.

	KT212a
Fig. 53	Attach magnets and brass trim to the steel frame.
	FP1270
Fig. 54	Bracket for HEBTKP.
	10000801