Vermont Castings, Majestic Products RHEDV Direct Vent Insert
Optional Accessories
Remote Controls
Optional remote control units are available to control different functions of the appliance.
Model | Function(s) Controlled |
MRC1 | ON/OFF |
MRC2 | ON/OFF and Temperature |
MRC3 | ON/OFF and Temperature control |
| with a digital and a programmable |
| 24 hour clock |
IMT | Wall mounted thermostat control |
Zero Clearance Kit
For installations other than in existing woodburning fireplaces such as new construction or renovation projects, a Zero Clearance Kit must be used. The HEZC enables these inserts to be installed in combusti- ble environments. It is recommended that an Air Kit (AKZC) be installed whenever using a Zero Clearance Kit. Consideration must be given to the dimensions of the Zero Clearance Kit and the requirements of the Air Kit when planning out the installation.
Follow the instructions supplied with the Zero Clear- ance Kit carefully for proper installation.
A Trim Options for RHEDV25
A1 RHE25SSP, HE25LP Trims
For use with RHEDV25
RHE25SSP | Small surround, black with thin polished |
| brass edge |
HE25LP | Large polished brass edge (to be used |
| with RHE25SSP) |
| Trim Assembly |
RHE25SSP
1.Install trim channels (left and right sides). Use two screws to assemble each piece.
2.Slide on the trim top channel and fasten it from the back side.
3.Install the trim top deflector using two screws.
4.Remove ALL plastic protective covering from brass trim.
Trim Top Deflector
Trim Frame Top
Section
Side View | FP1261a |
Fig. 27 Trim top deflector.
HE25LP
1.To install the kit you do not have to remove any piece of brass, you just add the external pieces.
2.Remove the frame trim from the unit if it is already installed.
3.Install trim channels (left and right sides) by remov- ing the two screws that hold the side brass trim and put them back to hold both parts.
4.Slide on the trim top channel and fasten it from the back side.
5.Remove the two screws that hold the top brass trim.
6.Install the two brackets to the studs in the bottom of the top channel. Use the nuts supplied with top trim channel.
A flat louvre kit OR a bay window kit need to be chosen to complete the installation.
22 | 10000801 |