Vermont Castings, Majestic Products RHEDV Direct Vent Insert
| B5 Cast Trim Options |
Cast Surround and Flat Face | |
HECBL | Cast Surround Black |
HECBLUE | Cast Surround Blue |
HECCG | Cast Surround Charcoal Grey |
HECGR | Cast Surround Green |
CSSP | Polished Brass Small Trim for |
| Cast Surround |
CSLP | Polished Brass Large Trim for Cast |
| Surround (to be used with CSSP) |
B6 Freestanding Kits
Convert Insert Into A Freestanding Stove
NOTE: 1. Requires Bay Window Face Kit
2.Vent starter kit FSHEDVSK must be in stalled to use any of the freestanding shells.
FSNVCSKB | Classic Black Freestanding Cast Shell |
FSNVCSKM | Midnight Black Enamel Freestanding |
| Cast Shell |
FSNVCSKG | Green Enamel Freestanding Cast Shell |
B7 Riser Kits
1.Install the unit according to Homeowner’s Manual.
2.Install the trim according to Installation Instructions.
3.Remove the two (2) screws at the bottom of the trim.
4.Install the riser at the bottom of the trim. (Fig. 55)
5.Fasten the trim with the same two (2) screws removed on step 3.
NOTE: The riser kit should only be used with the RHEBSL & RHEBXL trim.
| Trim Kit |
Riser Trim |
|
Decorative |
|
A | B |
| C |
| FP1276 |
Fig. 55 RHEBSL, RHEBXL trim kit. |
|
34 |
|
Riser Trim Dimensions
| Length A | Height B | Depth C |
42" (1067mm) | 1" (25.6mm) | 2.55" (64.8mm) | |
42" (1067mm) | 2" (50.9mm) | 2.58" (65.6mm) | |
42" (1067mm) | 5" (127.9mm) | 2.58" (65.6mm) |
| B8 Arch Door Kits |
|
|
HEADKA | Antique Brass Arch Door |
HEADKP | Polished Brass Arch Door |
C Trim Options for RHEDV42
C1 RHE42SSP and RHE42LP Trims
For use with RHEDV42
RHE42SSP Small surround, black with thin polished brass edge
RHE42LP Large polished brass edge (to be used with RHE42SSP)
Trim Assembly
RHE42SSP
1.Install trim channels (left and right sides). Use two screws to assemble each piece.
2.Slide on the trim top channel and fasten it from the back side.
3.Install the trim top deflector and use two screws to fasten it. (Fig. 56)
4.Remove ALL plastic protective covering from brass trim.
Side View
Trim Top Deflector
Trim Frame Top
Section
FP1261a
Fig. 56 Trim top deflector.
RHE42LP
To install the kit you do not have to remove any piece of brass, you just add the external pieces.
Remove the frame trim from the unit if it is already installed.
10000801