Enterasys Networks 2H252-25R manual Screws Chassis Cover Front Panel

Removing the Chassis Cover

3.Use a Phillips screwdriver to remove the four screws attaching the cover to the chassis. (See Figure B-1.)

Figure B-1 Removing the Chassis Cover

Screws (4)

Chassis Cover

Front Panel

Chassis

Note: If the device was rack mounted, the four screws fastening the cover to the front panel are removed and installed along with the rackmount brackets.

2504-30

4.Remove the cover by sliding it back until it clears the front of the chassis and then lifting it straight up and off the chassis.

To reinstall the chassis cover, perform the removal procedures in reverse.

B-4Optional Installations and Mode Switch Bank Settings