Enterasys Networks 2H252-25R manual Installing the Dram Simm

SIMM Upgrade

B.4.2 Installing the DRAM SIMM

CAUTION: Observe all antistatic precautions when handling sensitive electronic equipment.

To install a DRAM SIMM, refer to Figure B-4and proceed as follows:

1.With the SIMM alignment notch oriented as shown in Figure B-4, insert the SIMM down between the connector teeth.

2.Pivot the SIMM downward so the connector clips align with the two side notches of the SIMM and the connector clips lock the SIMM into place.

Figure B-4 Installing the DRAM

Connector

Clip

Side Notch

2

Connector

Teeth

1

Clip

Alignment Notch

SIMM Side Notch 2504-91

B-8Optional Installations and Mode Switch Bank Settings