Enterasys Networks A2H124-24P, A2H124-48P - page 61

Installing Optional Mini-GBICs
SecureStack A2 PoE Installation Guide 3-31
1. Removetheprotectivecovers(notshown)fromthefrontpanelLCfiber‐opticport
(port27inthisexample)andfromtheconnectorsoneachendofthecable.
2. InserttheLCcableconnectorintotheMini‐GBICLCconnectoruntilitclicksinto
place.
Figure 3-21 Cable Connection to LC Fiber-Optic Connectors
3. Plugtheotherendofthecableintotheappropriateportontheotherdevice.Some
cablesmaybeterminatedattheotherendwithtwoseparateconnectors,oneforeach
fiber‐opticstrand.Inthiscase,ensurethatthetransmitfiber‐opticstrandisconnected
tothereceiveportandthereceivefiber‐opticstrandtothetransmitport.
Note: Leave the protective covers in place when the connectors are not in use to prevent
contamination.
Note: To remove the LC cable connector, press on its release tab and pull it out of
Mini-GBIC LC connector.
1Mini-GBIC MT-RJ port connector 3Release tab
2LC cable connector 4Link/Activity LED
27 28
A2H124-24P
Ã
À
Â
Á
25
26
27
28
25/Up 26/Down
Stack