Installation
VERTICAL RISE WITH HORIZONTAL TERMINATION INSTALLATION (RECOMMENDED) - FREESTANDING:
A 45° elbow with a rodent screen may be used in place of the termination cap (or stainless steel termination hood).
Termination cap |
|
90°elbow |
|
Wall framing |
|
Vertical section of vent pipe |
|
Horizontal frame | Wall strap |
| |
for thimble |
|
| Clean |
| out tee |
| Wall |
| thimble |
ENVIRO Meridian |
|
Figure 25: Through Wall with Horizontal Termination.
THROUGH CONCRETE WALL WITH VERTICAL RISE INSTALLATIONS - FREESTANDING: |
| ||
A 45° elbow with a rodent screen may be used | Horizontal frame |
| |
in place of the termination cap (or stainless |
| ||
for thimble | Termination cap | ||
steel termination hood). | |||
Wall thimble |
| ||
|
| ||
This is the recommended installation to use if | 90°elbow |
| |
|
| ||
there is a concrete or retaining wall in line with | Wall framing |
| |
exhaust vent on pellet stove. |
| ||
|
| ||
| Vertical section |
| |
The termination must be 12 inches (30 cm) | of vent pipe |
| |
|
| ||
from the outside wall and 12 inches (30 cm) |
|
| |
above the ground. |
|
| |
|
| Concrete Wall | |
| ������ �������� | Clean out tee | |
Figure 26: Vertical rise with Horizontal Termination.
20
