Installation

6. Place the second side of the trim on the surround panel in the same manner used on the first side and secure in the same manner.

7. On the side trims, there are holes 2” (50 mm) from either end. Use a Phillips screwdriver to place a #8 screw 11⁄4” long in each hole and tighten (refer to Figure 41). This will keep the trim tight against the surround.

 

 

Magnetic Strips

 

 

8. Place

the

assembled

surround

 

 

 

 

 

 

 

 

 

 

panel around the stove; align the

 

 

 

 

 

 

 

slots

with the screw heads. Push

 

Figure 38: Magnet placement on trim.

 

 

 

 

 

surround in then down to

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

engage

the surround slots

 

 

 

 

 

 

 

 

 

on

the

mounting

screws

 

 

 

 

 

 

 

 

 

(see Figure 42). Make sure

 

 

 

 

 

 

 

 

 

the top surround panel sits

 

 

 

 

 

 

 

 

 

flat behind the stove top.

 

 

 

 

 

 

 

 

 

 

 

 

 

Figure 39: Corner brackets for trim.

Figure 40: Two pieces of corner

 

bracket.

Figure 41: Screw to hold the

 

Figure 42: Installed Surround Panel.

trim against the surround.

 

29

Page 29
Image 29
Enviro Meridian owner manual Surround in then down to