RACK MOUNT INSTALLATION

FOR INSTALLATION YOU WILL NEED THE FOLLOWING:

Centerpoint 2x8 or 2x16 Product

Power cord

Rails with hardware

User Guide

Epicenter KVM Cables for connecting video, keyboard, and mouse

STANDARD 1U

Warning!

INSTALLATION

To reduce the risk of personal injury or damage to the equip-

Use the following procedure to

ment, be sure that the following items are completed BEFORE

performing any work on the rack:

install Centerpoint 2x8 or 2x16 in

The leveling jacks are extended to the floor.

the rack.

Centerpoint 2x8 and 2x16 are

The full weight of the rack rests on the leveling jacks.

The stabilizing feet are attached to the rack, if it is a single-rack

shipped with the side-mount rails

installation.

already installed on the unit.

The racks are coupled in multiple-rack installations.

Insert a rack-mounting bracket

 

into the rack at a level that will be

 

comfortable for operating the keyboard, mouse and viewing the monitor. Align the screw holes at

the front and back of the rack on both side rails. Use one screw to at-

Important

tach the mounting bracket to the front of the rack and two

When mounting the rack slides

screws to attach the slide to the rear of the rack.

make sure that the end of the slides

Once the rack mounts are in place you can now place the Cen-

with the extension brackets are

terpoint 2x8 or 2x16 unit in the rack.

installed to the rear of the rack.

 

Leave the upper screen panel closed as you guide the rack- mount slides into the rails mounted

upon the rack. Once the system is in place depress the retaining but- tons and slide the unit com- pletely into the rack. Secure

the outer slides in place with the included retention screws.

Warning!

The Centerpoint products weigh in excess of 30 pounds and can be awkward to handle. Handle the product carefully and use sen- sible lifting procedures.

Take care to insure that the internal slide unit does not extend during transportation causing the unit to become unwieldy.

Epicenter, Inc. Page 8

Page 8
Image 8
Epicenter 2x8, 2x16 user manual Rack Mount Installation, Racks are coupled in multiple-rack installations