Cisco Systems 11500 Series Installing a CSS 11503 as a Freestanding Unit, Installing the CSS

Models: 11500 Series

1 206
Download 206 pages 7.48 Kb
Page 42
Image 42
•Installing a CSS 11503 as a Freestanding Unit

Chapter 1 Unpacking and Installing the CSS

Installing the CSS 11503

Installing the CSS 11503

The CSS 11503 can be a freestanding unit or installed in a 19-inch equipment rack, as described in the following sections.

Warning Do not remove the CSS 11503 cover. There are electrical shock hazards present in the unit if the cover is removed. The fans and power supply in a CSS 11503 are not user-serviceable or installable components.

Note Removing the CSS 11503 cover voids its warranty.

This section covers:

Installing a CSS 11503 as a Freestanding Unit

Installing a CSS 11503 as a Rackmounted Unit

Installing a CSS 11503 as a Freestanding Unit

To install a freestanding CSS 11503:

1.Position the CSS 11503 on the selected flat surface.

2.Attach the rubber feet, provided in the accessory kit, to each bottom corner of the CSS.

Note All cables connect to the front of the unit with the exception of the power cord.

 

Cisco 11500 Series Content Services Switch Hardware Installation Guide

1-14

78-13884-03

Page 42
Image 42
Cisco Systems 11500 Series manual Installing a CSS 11503 as a Freestanding Unit, Installing the CSS, 1-14