Cisco Systems 11500 Series Connecting a CSS 11503 Power Cord, Power switch AC power connector

Chapter 2 Cabling the CSS

Connecting the Power Cord

3.Plug the power cord into a dedicated 3-wire grounding receptacle.

4.To power on and boot the CSS, refer to Chapter 3, Booting and Configuring the CSS.

Connecting a CSS 11503 Power Cord

The following sections provide information on:

•Connecting a CSS 11503 AC Power Cord

•Connecting a CSS 11503 DC Power Cord

Connecting a CSS 11503 AC Power Cord

To connect an AC power cord to a CSS 11503:

1.At the rear of the chassis, ensure that the CSS power switch is in the O (off) position.

2.Plug the AC power cord connector into the CSS power connector, as shown in Figure 2-12.

Figure 2-12 Connecting a CSS 11503 AC Power Cord

1

100-
240V~
50-60	Hz
5A
430 W
	59543

2

1

Power switch

2

AC power connector

	Cisco 11500 Series Content Services Switch Hardware Installation Guide
78-13884-03		2-27