Cisco Systems 11500 Series manual 1 or, 2-23

Chapter 2 Cabling the CSS

			Connecting the Chassis to Ground
Table 2-8 Tools and Supplies (continued)
Quantity	Description	Comments
1 or 2	2-hole grounding lug. Lug must	Recommended types:
	fit 6 AWG stranded copper or	•	Panduit no. LCD6-10A-L
	37/24 flex cables. Each lug must
			(1 supplied in accessory
	have two holes, centered
			kit)
	0.625 in. (1.587 cm) apart, and
		•	Panduit no. LCC6-10A-L
	must accept M5 screws.
	One lug is supplied by Cisco		(long barrel)
		• Thomas & Betts no.
	Systems in the accessory kit. The
	supplied lug is for the router end		256-30695-1183(*4*)
	of the ground wire. You may	•	Burndy no. YA6CL2TC10
	wish to use a lug other than the
	one supplied. If you need a lug
	for the facility end of the ground
	wire, you must supply it.
1	Crimping tool	Must fit diameter of grounding
		lugs. Cisco Systems
		recommends that you use a
		crimping tool recommended by
		the lug manufacturer.
2	M5 screws with captive, locking	Included in accessory kit
	washers	shipped with the CSS.

	Cisco 11500 Series Content Services Switch Hardware Installation Guide
78-13884-03		2-23