Cisco Systems 11500 Series manual Booting and Configuring the CSS, Powering Up the CSS

C H A P T E R 3

Booting and Configuring the CSS

This chapter describes how to boot the CSS and using the configuration scripts. This chapter contains the following sections:

•Powering Up the CSS

•Powering Down the CSS

•Booting the CSS for the First Time

•Logging in to the CSS

•Using the Configuration Script

For more information on failure errors and messages that can occur during the boot process, refer to Appendix C, Troubleshooting.

Powering Up the CSS

To power up a CSS:

•On an AC CSS, toggle the power switch to the 1 (on) position.

–See Figure 2-11for the location of the CSS 11501 AC power switch.

–See Figure 2-12for the location of the CSS 11503 AC power switch.

–See Figure 2-14for the location of the CSS 11506 AC power switch for each power supply. Power on all of the supplies in the CSS. The AC OK and DC OK LEDs light up on each power supply. If either LED remains unlit, refer to Appendix C, Troubleshooting.

	Cisco 11500 Series Content Services Switch Hardware Installation Guide
78-13884-03		3-1