
Chapter 3 Booting and Configuring the CSS
Using the Configuration Script
!**************** SERVICE ****************
service Server1
ip address 192.168.3.58 active
service Server2
ip address 192.168.3.59 active
!**************** OWNER ******************
owner L3_Owner content L3_Rule add service Server1 add service Server2
vip address 192.168.3.6 balance aca
active
##########################################
## Setup Completed Successfully!!! ##
##########################################
For detailed configuration information, refer to the Content
Services Switch Basic Configuration Guide.
Configuring Layer 5 Load Balancing
A Layer 5
When you select Layer 5 load balancing, the script automatically:
•Creates an owner (L5_Owner)
•Creates a Layer 3 content rule (L3_Rule)
•Creates a Layer 5 content rule (L5_Rule) and defines:
–Protocol tcp
–Port 80
–URL "/*"
–Load balance method as ACA
•Activates the services
•Activates the content rule
•Saves the
| Cisco 11500 Series Content Services Switch Hardware Installation Guide |